Original file

Land Rover Range Rover Evoque Bosch MEDC17.9 K8D2-12K532-FCF / 10SW046697

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover Range Rover Evoque, hardware number K8D2-12K532-FCF and software number 10SW046697, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 diesel 150PS
Control unit
Bosch MEDC17.9
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
K8D2-12K532-FCF
Software number
10SW046697

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberK8D2-12K532-FCF
Software number10SW046697
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyea37303b8709e2c8
Identification read from the file
ECU nameMEDC17.9
Read typeOBD read (no boot area)
Bosch part / software10SW046697Offset in the file: 0x02001A
Bosch project identifier (EPK)50/1/MEDC17_9/190/P1226//P1226C481_FR_MHEV_3_60///Offset in the file: 0x0C0130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K8D2-12K532-FCF and software number 10SW046697. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page