Original file

Bosch MEDC17.9 K9C3-12K532-FAC / 10SW039969

An original (stock) flash read of the Bosch MEDC17.9 control unit, hardware number K9C3-12K532-FAC and software number 10SW039969, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch MEDC17.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
K9C3-12K532-FAC
Software number
10SW039969
Software / calibration
P1226C471_MC_SPM_3_10

Technical data

Vehicle
Enginediesel
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberK9C3-12K532-FAC
Software number10SW039969
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd15f4b01efc2862f
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW039969Offset in the file: 0x0C001A
Software / calibrationP1226C471_MC_SPM_3_10Offset in the file: 0x0C0078
Bosch project identifier (EPK)49/1/MEDC17_9/190/P1226//P1226C471_MC_SPM_3_10///Offset in the file: 0x0C0078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K9C3-12K532-FAC and software number 10SW039969. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
K8D2-12K532-FAT10SW079544Rover
K8D2-12K532-FBJK8D2-12K532-FBJLand Rover Range Rover Evoque
K8D2-12K532-FBL10SW057322Land Rover Range Rover Evoque
K8D2-12K532-FCF10SW046697Land Rover Range Rover Evoque
K9C3-12K532-FCDC475_M_20_19_X540_TT_4AS_ES_20D4_MPP_SS6S_18_FS1019Jaguar E-Pace 2.0 D
KJ32-12K532-FCCKJ32-12K532-FCCLand Rover Range Rover Evoque
KJ32-12K532-FCD10SW045421Land Rover Evoque
KJ32-12K532-FCE10SW067555Land Rover Evoque

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page