Original file

Mini One Bosch MEV17.2.2 0089V10WH00BRBCS4 / 1037522113

An original (stock) flash read of the Bosch MEV17.2.2 control unit, fitted in Mini One, hardware number 0089V10WH00BRBCS4 and software number 1037522113, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini One1.6 petrol 98PS
Control unit
Bosch MEV17.2.2
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0089V10WH00BRBCS4
Software number
1037522113

Technical data

Vehicle
BrandMini
Car modelOne
Engine1.6 petrol 98PS
Power98.0PS / 72.1kW
Control unit
Control unitBosch MEV17.2.2
ECU makerBosch
Hardware number0089V10WH00BRBCS4
Software number1037522113
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb8251f06cf2ddfa2
Identification read from the file
ECU nameMEV17.2.2
Read typeCalibration only (data set)
Bosch part / software1037522113Offset in the file: 0x1C001A
Software / calibration0089V10WH00BRBCS4Offset in the file: 0x1C0079
Bosch project identifier (EPK)46/1/MED17/11/256_MEV_17.2.2//9V1WH00B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEV17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0089V10WH00BRBCS4 and software number 1037522113. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEV17.2.2

Bosch MEV17.2.2 original files

The Bosch MEV17.2.2 unit page