Original file

Mini Cooper Bosch MEV17.2.2 0089V10WMN0BRBES2 / 1037551989

An original (stock) flash read of the Bosch MEV17.2.2 control unit, fitted in Mini Cooper, hardware number 0089V10WMN0BRBES2 and software number 1037551989, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini Cooper1.6
Control unit
Bosch MEV17.2.2
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0089V10WMN0BRBES2
Software number
1037551989
DME hardware number
8652745

Technical data

Vehicle
BrandMini
Car modelCooper
Engine1.6
Control unit
Control unitBosch MEV17.2.2
ECU makerBosch
Hardware number0089V10WMN0BRBES2
Software number1037551989
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key41f42f39808eb4cd
Identification read from the file
ECU nameMEV17.2.2
Read typeFull read (boot area included)
Bosch part / software1037551989Offset in the file: 0x02001A
DME hardware number8652745Offset in the file: 0x00D8AA
Software / calibration0089V10WMN0BRBES2Offset in the file: 0x1C0079
Internal build string011_G.8.1.1_MEV1722_1767Offset in the file: 0x00D558
Bosch project identifier (EPK)46/1/MED17/11/256_MEV_17.2.2//9V1WMN0B/Dst00//Offset in the file: 0x1BFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEV17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0089V10WMN0BRBES2 and software number 1037551989. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEV17.2.2

Bosch MEV17.2.2 original files

The Bosch MEV17.2.2 unit page