Original file
Mini 3-door Bosch MEVD17.2.3 00003609_029_020_001#000034D6_029_024_007 / 1037555255
An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini 3-door, hardware number 00003609_029_020_001#000034D6_029_024_007 and software number 1037555255, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mini 3-doorpetrol · 75.0PS / 55.2kW
- Control unit
- Bosch MEVD17.2.3
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 00003609_029_020_001#000034D6_029_024_007
- Software number
- 1037555255
- Software / calibration
- 00003609_029_020_001 / 000034D6_029_024_007
Technical data
| Brand | Mini |
|---|---|
| Car model | 3-door |
| Engine | petrol |
| Displacement | 1.2 |
| Power | 75.0PS / 55.2kW |
| Control unit | Bosch MEVD17.2.3 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 00003609_029_020_001#000034D6_029_024_007 |
| Software number | 1037555255 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | b4cc6b9725882cd9 |
| ECU name | MEVD17.2.3 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 1037555255 | Offset in the file: 0x18001A |
| Software / calibration | 00003609_029_020_001 / 000034D6_029_024_007 | Offset in the file: 0x1FFE21 |
| Data set description | MEVD17.2.3-B38-A12-U0-F56-HGAG-EU6-LL-_RL-P-Red-KVV-PVL-C-Muster | |
| Bosch project identifier (EPK) | 67/1/MEVD/11/MEVD1723_00003609_029_020_001//00003609_029_020_001/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 00003609_029_020_001#000034D6_029_024_007 and software number 1037555255. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.3
| Hardware | Software | Vehicles |
|---|---|---|
| 0000360995 | 10SW012946 | BMW 3 Serie - Sedan |
| 0000360995 | 10SW029550 | BMW 3 Serie |
| 0000360995 | 10SW049129 | BMW 3 Serie - Sedan, BMW 3-door, BMW 1 Serie |
| 00003609952801 | 1267234523 | BMW 3 Serie - Sedan 1.5 |
| 00003609_029_030_001#0000316C_029_034_004 | 00003609_029_030_001 | BMW 1er 118i |
| 00003609_069_020_001#0000316C_069_024_006 | 00003609_069_020_001 | BMW 1er 118i |
| 00003609_069_020_001#00003C79_069_024_005 | 00003609_069_020_001 | Mini Convertible 1.5T |
| 00003609_069_040_001#0000316C_069_044_006 | 00003609_069_040_001 | BMW 2er 218i |