Original file

Mini Cooper Bosch MEVD17.2.3 00003609_069_050_001#0000552B_069_050_003

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini Cooper, software number 00003609_069_050_001#0000552B_069_050_003, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini CooperB38A15 · 136.0PS / 100.0kW
Control unit
Bosch MEVD17.2.3
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Software number
00003609_069_050_001#0000552B_069_050_003
Bosch part / software
10SW012909
Software / calibration
00003609_069_050_001 / 0000552B_069_050_003

Technical data

Vehicle
BrandMini
Car modelCooper
EngineB38A15
FuelPetrol
Displacement1.5
Power136.0PS / 100.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Software number00003609_069_050_001#0000552B_069_050_003
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key32324db64452eefd
Identification read from the file
ECU nameMEVD17.2.3
Read typeCalibration only (data set)
Bosch part / software10SW012909Offset in the file: 0x18001A
Software / calibration00003609_069_050_001 / 0000552B_069_050_003Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-A15-M0-F55-HGAG-EU6-LL-_RL-PVL-EL-Kanal_V25-C-Muster_RAN
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003609_069_050_001//00003609_069_050_001///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 00003609_069_050_001#0000552B_069_050_003. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page