Original file
Mini Cooper Bosch MEVD17.2.3 00003609_149_040_001#00005529_149_040_001
An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini Cooper, software number 00003609_149_040_001#00005529_149_040_001, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mini CooperB38A12 · 75.0PS / 55.2kW
- Control unit
- Bosch MEVD17.2.3
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Software number
- 00003609_149_040_001#00005529_149_040_001
- Bosch part / software
- 10SW049129
- Software / calibration
- 00003609_149_040_001 / 00005529_149_040_001
Technical data
| Brand | Mini |
|---|---|
| Car model | Cooper |
| Engine | B38A12 |
| Fuel | Petrol |
| Displacement | 1.2 |
| Power | 75.0PS / 55.2kW |
| Control unit | Bosch MEVD17.2.3 |
|---|---|
| ECU maker | Bosch |
| Software number | 00003609_149_040_001#00005529_149_040_001 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 69680ada8143930e |
| ECU name | MEVD17.2.3 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW049129 | Offset in the file: 0x18001A |
| Software / calibration | 00003609_149_040_001 / 00005529_149_040_001 | Offset in the file: 0x1FFE21 |
| Data set description | MEVD17.2.3-B38-A12-U0-F56-HGAG-EU6-LL-_RL-P-Red-KVV-PVL-V100-C-Muster_RAN | |
| Bosch project identifier (EPK) | 67/1/MEVD/11/MEVD1723_00003609_149_040_001//00003609_149_040_001/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 00003609_149_040_001#00005529_149_040_001. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.3
| Hardware | Software | Vehicles |
|---|---|---|
| 00003609_149_040_001#0000317C_149_040_005 | BMW 3er | |
| 00003609_149_040_001#0000338D_149_040_001 | Mini 5-door | |
| 00003609_149_040_001#000036BC_149_040_007 | Mini Clubman | |
| 00003609_149_040_001#0000551B_149_040_001 | BMW 1 Serie - 5drs | |
| 00003609_149_050_001#0000338D_149_050_001 | Mini Cooper | |
| 00003609_149_050_001#00003C79_149_050_001 | Mini Convertible | |
| 00003609_149_050_001#00005528_149_050_001 | Mini One | |
| 00003609_159_010_001#00005528_159_010_001 | Mini One |