Original file

Mini 3-door Bosch MEVD17.2.3 0000360995 / 10SW049129

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini 3-door, hardware number 0000360995 and software number 10SW049129, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini 3-door1.5 petrol 136PS
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0000360995
Software number
10SW049129
Software / calibration
00003609_149_040_001 / 00002917_149_040_001

Technical data

Vehicle
BrandMini
Car model3-door
Engine1.5 petrol 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0000360995
Software number10SW049129
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyae043be5b8cafb7b
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
Bosch part / software10SW049129Offset in the file: 0x18001A
Software / calibration00003609_149_040_001 / 00002917_149_040_001Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-A15-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster
Internal build stringMEVD17.2.3-CB_L6_77.13.00Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003609_149_040_001//00003609_149_040_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000360995 and software number 10SW049129. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 3 Serie - SedanFlash4,096.00 KB€15Add to cart
BMW 3 Serie - SedanFlash2,048.00 KB€15Add to cart
BMW 1 SerieFlash4,096.00 KB€15Add to cart

All reads of 0000360995 / 10SW049129

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page