Original file

BMW I8 BR PERFORMANCE Bosch MEVD17.2.3 0030198190 / 1037547082

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW I8 BR PERFORMANCE, hardware number 0030198190 and software number 1037547082, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW I8 BR PERFORMANCE1.5 diesel · 231PS / 169.9kW
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030198190
Software number
1037547082
Bosch part / software
10SW004135
Software / calibration
00003743_049_020_001 / 000026DB_049_020_006

Technical data

Vehicle
BrandBMW
Car modelI8 BR PERFORMANCE
Engine1.5 diesel
Power231PS / 169.9kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0030198190
Software number1037547082
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key433ace8eb9cc0e60
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW004135Offset in the file: 0x18001A
Software / calibration00003743_049_020_001 / 000026DB_049_020_006Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-I12-K15-T0-I12-HGAG-EU6_LL-RL-PVL1
Internal build stringMEVD17.2.3-CB_L6_77.10.01Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003743_049_020_001//00003743_049_020_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030198190 and software number 1037547082. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page