Original file

BMW 1er Bosch MEVD17.2.3 0170325294 / 00003609_049_040_001#0000333E_049_044_007

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW 1er, hardware number 0170325294 and software number 00003609_049_040_001#0000333E_049_044_007, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1erB38B15 · 109.0PS / 80.2kW
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170325294
Software number
00003609_049_040_001#0000333E_049_044_007
Bosch part / software
10SW004064
Software / calibration
00003609_049_040_001 / 0000333E_049_044_007

Technical data

Vehicle
BrandBMW
Car model1er
EngineB38B15
FuelPetrol
Displacement1.5
Power109.0PS / 80.2kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0170325294
Software number00003609_049_040_001#0000333E_049_044_007
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key47ebb28bb8089ca9
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW004064Offset in the file: 0x18001A
Software / calibration00003609_049_040_001 / 0000333E_049_044_007Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-B15-M0-F20-HGAG-EU6-LL-_RL-LS-RED-EL-Kanal_V25-BBG2_5-C-Muster
Internal build stringMEVD17.2.3-CB_L6_77.10.01Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003609_049_040_001//00003609_049_040_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170325294 and software number 00003609_049_040_001#0000333E_049_044_007. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page