Original file

Mini 3-door Bosch MEVD17.2.3 0200000119 / 10SW005955

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini 3-door, hardware number 0200000119 and software number 10SW005955, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini 3-door2.0 petrol 191PS
Control unit
Bosch MEVD17.2.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0200000119
Software number
10SW005955
Software / calibration
0000360A_069_020_001 / 00003A6B_069_024_005

Technical data

Vehicle
BrandMini
Car model3-door
Engine2.0 petrol 191PS
Power191.7PS / 141.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0200000119
Software number10SW005955
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1dc911331c4de681
Identification read from the file
ECU nameMEVD17.2.3
Read typeCalibration only (data set)
Bosch part / software10SW005955Offset in the file: 0x18001A
Software / calibration0000360A_069_020_001 / 00003A6B_069_024_005Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster-KVV
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_0000360A_069_020_001//0000360A_069_020_001///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0200000119 and software number 10SW005955. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page