Original file

BMW i8 Coupe Bosch MEVD17.2.3 0261S12011 / 10SW012975

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW i8 Coupe, hardware number 0261S12011 and software number 10SW012975, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW i8 Coupe1.5 petrol 231PS
Control unit
Bosch MEVD17.2.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S12011
Software number
10SW012975
Software / calibration
00004123_039_020_001 / 000026DB_039_020_004

Technical data

Vehicle
BrandBMW
Car modeli8 Coupe
Engine1.5 petrol 231PS
Power231.1PS / 170.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0261S12011
Software number10SW012975
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2b6acba4b406d94d
Identification read from the file
ECU nameMEVD17.2.3
Read typeCalibration only (data set)
Bosch part / software10SW012975Offset in the file: 0x18001A
Software / calibration00004123_039_020_001 / 000026DB_039_020_004Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-I12-K15-T0-I12-HGAG-EU6_LL-RL-PVL1
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00004123_039_020_001//00004123_039_020_001///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12011 and software number 10SW012975. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
0261S108251037540909Mini 3-door, Mini Cooper S
0261S111511037543443Mini Cooper
0261S1115110SW004064Mini Clubman, Mini 3-door
0261S111531037543457Mini 3-door 2.0T
0261S138041037552693Mini One
0261S144451037555393Mini 3-door
0261S1508810SW004120Mini Clubman F54
0261S1528500003609_099_030_001BMW 2er 218i

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page