Original file

Mini Clubman Bosch MEVD17.2.3 0261S19546 / 10SW049130

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini Clubman, hardware number 0261S19546 and software number 10SW049130, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini Clubman2.0 petrol 192PS
Control unit
Bosch MEVD17.2.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S19546
Software number
10SW049130
Software / calibration
0000360A_149_040_001 / 00005533_149_040_001

Technical data

Vehicle
BrandMini
Car modelClubman
Engine2.0 petrol 192PS
Power192.0PS / 141.2kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number0261S19546
Software number10SW049130
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd0c7473134296dac
Identification read from the file
ECU nameMEVD17.2.3
Read typeCalibration only (data set)
Bosch part / software10SW049130Offset in the file: 0x18001A
Software / calibration0000360A_149_040_001 / 00005533_149_040_001Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B48-A20-M0-F54-HGAG-EU6-LL-_RL-AWD-PVL-C-Muster-KVV-RAN
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_0000360A_149_040_001//0000360A_149_040_001///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S19546 and software number 10SW049130. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
0261S1668510SW005866Mini 3-door
0261S1711000002B2A_139_030_001BMW 2 Serie - Active Tourer Hybrid 225xe
0261S1853110SW012994Mini Clubman
0261S1853310SW012993Mini Clubman
0261S1954710SW020802Mini Countryman
02913710SW029137BMW 3er
03L906023B10SW017264Mini 3-door
5526931037552693Mini 3-door

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page