Original file

Mini Cooper S Bosch MEVD17.2.3 10SW005948

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini Cooper S, software number 10SW005948, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini Cooper S2.0 petrol 191PS
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW005948
Bosch part / software
10SW005955
Software / calibration
0000360A_069_020_001 / 00003A6B_069_024_005

Technical data

Vehicle
BrandMini
Car modelCooper S
Engine2.0 petrol 191PS
Power191.2PS / 140.7kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Software number10SW005948
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd796540734a3789d
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW005955Offset in the file: 0x18001A
Software / calibration0000360A_069_020_001 / 00003A6B_069_024_005Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster-KVV
Internal build stringMEVD17.2.3-CB_L6_77.10.02Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_0000360A_069_020_001//0000360A_069_020_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW005948. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mini 3-doorFlash4,096.00 KB€15Add to cart
Mini 3-doorFlash4,096.00 KB€15Add to cart
Mini 3-doorFlash4,096.00 KB€15Add to cart
Mini ClubmanFlash4,096.00 KB€15Add to cart

All reads of 10SW005948

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
10SW004145Mini 3-door, Mini
10SW004422BMW 5-door, BMW 2er, BMW 2-Series
10SW005866Mini 3-door, Mini 5-door, Mini 1 Serie - 5drs
10SW005918BMW 1er, BMW 1 Serie - 5drs, BMW X1
10SW005954Mini 3-door, Mini Cooper S JCW F56, Mini X1 SUV
10SW005955Mini 3-door, Mini Cooper, Mini Cooper S
10SW007534BMW 1 Serie - 5drs, BMW 1er, BMW 3-door
10SW007541BMW 1 Serie - 5drs, BMW 1er

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page