Original file

BMW X1 SUV Bosch MEVD17.2.3 10SW012914

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW X1 SUV, software number 10SW012914, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X1 SUV1.5 petrol 136PS
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW012914
Bosch part / software
10SW073486
Software / calibration
00003609_149_050_001 / 00005524_149_050_001

Technical data

Vehicle
BrandBMW
Car modelX1 SUV
Engine1.5 petrol 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Software number10SW012914
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4f24d2d07b0c3373
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW073486Offset in the file: 0x18001A
Software / calibration00003609_149_050_001 / 00005524_149_050_001Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-A15-M0-F48-HGAG-EU6-LL-_RL-PVL-EL-Kanal_V25-C-Muster_RAN
Internal build stringMEVD17.2.3-CB_L6_77.13.00Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003609_149_050_001//00003609_149_050_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW012914. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 2 Serie - Active TourerFlash4,096.00 KB€15Add to cart

All reads of 10SW012914

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
10SW007598Mini 3-door, Mini X1 SUV, Mini Clubman
10SW009176BMW i8
10SW011615BMW 2 Serie - Active Tourer Hybrid
10SW012909BMW 1 Serie - 5drs, BMW 3 Serie - Touring, BMW 1er
10SW012918BMW 1 Serie - 5drs, BMW 2er, BMW 1er
10SW012935BMW 1 Serie - 5drs, BMW 3-door, BMW 1er
10SW012946BMW 1 Serie - 5drs, BMW 1er
10SW012975BMW i8 Coupe, BMW i8

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page