Original file

BMW i8 Coupe Bosch MEVD17.2.3 10SW035916

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW i8 Coupe, software number 10SW035916, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW i8 Coupe1.5 petrol 231PS
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW035916
Bosch part / software
10SW048742
Software / calibration
000048B1_069_120_001 / 00004C90_069_120_001

Technical data

Vehicle
BrandBMW
Car modeli8 Coupe
Engine1.5 petrol 231PS
Power231.1PS / 170.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Software number10SW035916
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key18c5bade5d2c3755
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW048742Offset in the file: 0x18001A
Software / calibration000048B1_069_120_001 / 00004C90_069_120_001Offset in the file: 0x1FFE21
Data set descriptionMEVD1723-B38-I12-K15-T0-I12-HGAG-EU6d-_170Nm-320kW-LL-RL-AWD-PVL1-KVV-OPF_LCI
Internal build stringMEVD17.2.3-CB_L6_77.13.00Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_000048B1_069_120_001//000048B1_069_120_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW035916. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
10SW029177Mini 3-door, Mini Clubman, Mini X1 SUV
10SW029520Mini Clubman
10SW029523Mini 2er, Mini Cooper, Mini Clubman
10SW029550BMW 3 Serie - Touring, BMW 1er, BMW F23
10SW036555BMW 2 Serie - Active Tourer Hybrid, BMW Countryman, Mini
10SW036943BMW 1 Serie - 5drs, BMW 1er, BMW 2 Serie - Cabrio
10SW048742BMW i8 Coupe
10SW049128BMW 1 Serie - 5drs, BMW 3 Serie - Touring, BMW 3er

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page