Original file

BMW 1 Serie Bosch MEVD17.2.3 10SW049448

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in BMW 1 Serie, software number 10SW049448, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie1.5 petrol 136PS
Control unit
Bosch MEVD17.2.3
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW049448
Bosch part / software
10SW049129
Software / calibration
00003609_149_040_001 / 000051A2_149_040_001

Technical data

Vehicle
BrandBMW
Car model1 Serie
Engine1.5 petrol 136PS
Power136.0PS / 100kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Software number10SW049448
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key79451a290fe5d75a
Identification read from the file
ECU nameMEVD17.2.3
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW049129Offset in the file: 0x18001A
Software / calibration00003609_149_040_001 / 000051A2_149_040_001Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-B15-M0-F20-HGAG-CHN6b--_LL-RL-CHINA-EL-Kanal_V25-BBG2_5-C-Muste
Internal build stringMEVD17.2.3-CB_L6_77.13.00Offset in the file: 0x00FDBC
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00003609_149_040_001//00003609_149_040_001///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW049448. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

HardwareSoftwareVehicles
10SW048742BMW i8 Coupe
10SW049128BMW 1 Serie - 5drs, BMW 3 Serie - Touring, BMW 3er
10SW049129BMW 1 Serie - 5drs, BMW 3-door, BMW X1 SUV
10SW049130Mini 3-door, Mini Clubman, Mini X1 SUV
10SW073485Mini 3-door, Mini Cooper, Mini Countryman
10SW073486Mini Clubman
10SW074627BMW X1 SUV
10SW078159Mini 3-door, Mini 2 Serie - Active Tourer, Mini Clubman

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page