Original file

Mini 3-door Bosch MEVD17.2.3 552693 / 1037552693

An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini 3-door, hardware number 552693 and software number 1037552693, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini 3-door1.2 petrol 137PS
Control unit
Bosch MEVD17.2.3
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
552693
Software number
1037552693
Software / calibration
00002B5B_049_030_001 / 0000291B_049_030_003

Technical data

Vehicle
BrandMini
Car model3-door
Engine1.2 petrol 137PS
Power137.3PS / 101.0kW
Control unit
Control unitBosch MEVD17.2.3
ECU makerBosch
Hardware number552693
Software number1037552693
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key90c8592de09a00af
Identification read from the file
ECU nameMEVD17.2.3
Read typeCalibration only (data set)
Bosch part / software1037552693Offset in the file: 0x18001A
Software / calibration00002B5B_049_030_001 / 0000291B_049_030_003Offset in the file: 0x1FFE21
Data set descriptionMEVD17.2.3-B38-A12-U0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster
Bosch project identifier (EPK)67/1/MEVD/11/MEVD1723_00002B5B_049_030_001//00002B5B_049_030_001///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 552693 and software number 1037552693. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.3

Bosch MEVD17.2.3 original files

The Bosch MEVD17.2.3 unit page