Original file
Mini 3-door Bosch MEVD17.2.3 DST#MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster / 0000360A_099_030_001#0000291D_099_030_002
An original (stock) flash read of the Bosch MEVD17.2.3 control unit, fitted in Mini 3-door, hardware number DST#MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster and software number 0000360A_099_030_001#0000291D_099_030_002, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mini 3-door2.0 270HP
- Control unit
- Bosch MEVD17.2.3
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- DST#MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster
- Software number
- 0000360A_099_030_001#0000291D_099_030_002
- Bosch part / software
- 10SW017264
- Software / calibration
- 0000360A_099_030_001 / 0000291D_099_030_002
Technical data
| Brand | Mini |
|---|---|
| Car model | 3-door |
| Engine | 2.0 270HP |
| Fuel | Petrol |
| Control unit | Bosch MEVD17.2.3 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster |
| Software number | 0000360A_099_030_001#0000291D_099_030_002 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 7f3a8c5a3f952315 |
| ECU name | MEVD17.2.3 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW017264 | Offset in the file: 0x18001A |
| Software / calibration | 0000360A_099_030_001 / 0000291D_099_030_002 | Offset in the file: 0x1FFE21 |
| Data set description | MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster | |
| Bosch project identifier (EPK) | 67/1/MEVD/11/MEVD1723_0000360A_099_030_001//0000360A_099_030_001/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.3-B48-A20-M0-F56-HGAG-EU6-LL-_RL-PVL-C-Muster and software number 0000360A_099_030_001#0000291D_099_030_002. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.