Original file

BMW X3 SUV Bosch MEVD17.2.4 0030088159 / 1037519068

An original (stock) flash read of the Bosch MEVD17.2.4 control unit, fitted in BMW X3 SUV, hardware number 0030088159 and software number 1037519068, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 SUVN20B20 · 184.0PS / 135.3kW
Control unit
Bosch MEVD17.2.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030088159
Software number
1037519068
Software / calibration
9ZS98E0B / 98EGAFX2

Technical data

Vehicle
BrandBMW
Car modelX3 SUV
EngineN20B20
FuelPetrol
Displacement2.0
Power184.0PS / 135.3kW
Control unit
Control unitBosch MEVD17.2.4
ECU makerBosch
Hardware number0030088159
Software number1037519068
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5617ce5207040374
Identification read from the file
ECU nameMEVD17.2.4
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037519068Offset in the file: 0x18001A
Software / calibration9ZS98E0B / 98EGAFX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.4-N20-Mo-B20-U0-F025-EU5-HGAG_-LL-RL-VS
Internal build stringMEVD17.2.4-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZS98E0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030088159 and software number 1037519068. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.4

HardwareSoftwareVehicles
00001243031037521363BMW 3 Serie
00001243031037528793BMW 5 Serie
00300198581037519068BMW 5 Serie - Sedan
00300664241037523844BMW F20
00300943081037523844BMW F20
00300997681037523844BMW 3 Serie - Sedan
00301269031037524902BMW 5 Serie - Sedan
00301302221037524902BMW 3 Serie - Sedan

Bosch MEVD17.2.4 original files

The Bosch MEVD17.2.4 unit page