Original file

BMW F10/F11/F18 Bosch MEVD17.2.4 0261S08515 / 1037524902

An original (stock) flash read of the Bosch MEVD17.2.4 control unit, fitted in BMW F10/F11/F18, hardware number 0261S08515 and software number 1037524902, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F182.0 petrol 218PS
Control unit
Bosch MEVD17.2.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S08515
Software number
1037524902
Bosch part / software
1037545602
Software / calibration
9ZS9BF0B / 9BFGBAX3

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18
Engine2.0 petrol 218PS
Power218PS / 160.3kW
Control unit
Control unitBosch MEVD17.2.4
ECU makerBosch
Hardware number0261S08515
Software number1037524902
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7042e5391b2fbd66
Identification read from the file
ECU nameMEVD17.2.4
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037545602Offset in the file: 0x18001A
Software / calibration9ZS9BF0B / 9BFGBAX3Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.4-N20-Mo-B20-O0-F010-EU5-HGAG_-LL-RL-VS
Internal build stringMEVD17.2.4-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZS9BF0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08515 and software number 1037524902. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.4

HardwareSoftwareVehicles
0261S084401037524582BMW Z4, BMW E89
0261S084401037527766BMW Z4
0261S084401037544052BMW Z4
0261S084401037546748BMW Z4
0261S088341037546748BMW Z4, BMW E89 2.0i, BMW E89
0261S0883410SW003797BMW Z4
0261S089951037528736BMW F10/F11/F18, BMW 5 Serie - Sedan 2.0i
0261S090061037528793BMW F10/F11/F18

Bosch MEVD17.2.4 original files

The Bosch MEVD17.2.4 unit page