Original file
BMW 1 Serie - 5drs Bosch MEVD17.2.4 9ZS9BG0B#9BGGACX1 / 10SW004118
An original (stock) flash read of the Bosch MEVD17.2.4 control unit, fitted in BMW 1 Serie - 5drs, hardware number 9ZS9BG0B#9BGGACX1 and software number 10SW004118, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 1 Serie - 5drsN20B20 · 217.5PS / 160.0kW
- Control unit
- Bosch MEVD17.2.4
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 9ZS9BG0B#9BGGACX1
- Software number
- 10SW004118
- Software / calibration
- 9ZS9BG0B / 9BGGACX1
Technical data
| Brand | BMW |
|---|---|
| Car model | 1 Serie - 5drs |
| Engine | N20B20 |
| Fuel | Petrol |
| Displacement | 2.0 |
| Power | 217.5PS / 160.0kW |
| Control unit | Bosch MEVD17.2.4 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 9ZS9BG0B#9BGGACX1 |
| Software number | 10SW004118 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 7753da4344cf5660 |
| ECU name | MEVD17.2.4 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW004118 | Offset in the file: 0x18001A |
| Software / calibration | 9ZS9BG0B / 9BGGACX1 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.4-N20-Mo-B20-M0-F020-EU5-HGAG_-LL-RL-VS | |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//9ZS9BG0B/Dst00// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.4 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 9ZS9BG0B#9BGGACX1 and software number 10SW004118. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.4
| Hardware | Software | Vehicles |
|---|---|---|
| 9ZS9BE5B#9BEGBIX2 | 1037545546 | BMW 3er 320i |
| 9ZS9BF0B#9BFGBIX0 | 1037545602 | BMW 3er 320i |
| 9ZS9BF0B#9BFGBIX3 | 1037545602 | BMW 3er 320i |
| 9ZS9BF0B#9BFGDEX3 | 1037528793 | BMW 3 Serie - Sedan 328i |
| 9ZS9BG0B#9BGGACX1 | 9ZS9BG0B | BMW 1 Serie - 5drs 125i |
| 9ZS9BG0B#9BGGAFX0 | 10SW004118 | BMW F25 |
| 9ZS9BG0B#9BGGBBX1 | 1037537695 | BMW 5er 528i |
| 9ZS9BG0B#9BGGBDX1 | 1037523844 | BMW 5 Serie - Sedan 520i |