Original file

BMW 1 Serie - 5drs 125i Bosch MEVD17.2.4 9ZS9BG0B#9BGGACX1 / 9ZS9BG0B

An original (stock) flash read of the Bosch MEVD17.2.4 control unit, fitted in BMW 1 Serie - 5drs 125i, hardware number 9ZS9BG0B#9BGGACX1 and software number 9ZS9BG0B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie - 5drs 125ipetrol 218.0PS / 160.3kW
Control unit
Bosch MEVD17.2.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9ZS9BG0B#9BGGACX1
Software number
9ZS9BG0B
Bosch part / software
10SW004118
Software / calibration
9ZS9BG0B / 9BGGACX1

Technical data

Vehicle
BrandBMW
Car model1 Serie - 5drs 125i
Enginepetrol 218.0PS / 160.3kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.4
ECU makerBosch
Hardware number9ZS9BG0B#9BGGACX1
Software number9ZS9BG0B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb9cd049845c43695
Identification read from the file
ECU nameMEVD17.2.4
Read typeFull read (boot area included)
Bosch part / software10SW004118Offset in the file: 0x18001A
Software / calibration9ZS9BG0B / 9BGGACX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.4-N20-Mo-B20-M0-F020-EU5-HGAG_-LL-RL-VS
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZS9BG0B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9ZS9BG0B#9BGGACX1 and software number 9ZS9BG0B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.4

HardwareSoftwareVehicles
9ZS9BF0B#9BFGBIX01037545602BMW 3er 320i
9ZS9BF0B#9BFGBIX31037545602BMW 3er 320i
9ZS9BF0B#9BFGDEX31037528793BMW 3 Serie - Sedan 328i
9ZS9BG0B#9BGGACX110SW004118BMW 1 Serie - 5drs
9ZS9BG0B#9BGGAFX010SW004118BMW F25
9ZS9BG0B#9BGGBBX11037537695BMW 5er 528i
9ZS9BG0B#9BGGBDX11037523844BMW 5 Serie - Sedan 520i
9ZS9BG0B#9BGGCBX19BGGCBX1BMW 3er 320i

Bosch MEVD17.2.4 original files

The Bosch MEVD17.2.4 unit page