Original file

BMW F20 Bosch MEVD17.2.5 0030108235 / 1037523874

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW F20, hardware number 0030108235 and software number 1037523874, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F20N13B16 · 136.0PS / 100.0kW
Control unit
Bosch MEVD17.2.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030108235
Software number
1037523874
Bosch part / software
10SW001131
Software / calibration
9ZX99T0B / 0000191E_059_010_003

Technical data

Vehicle
BrandBMW
Car modelF20
EngineN13B16
FuelPetrol
Displacement1.6
Power136.0PS / 100.0kW
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number0030108235
Software number1037523874
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5b6ab61202d44b01
Identification read from the file
ECU nameMEVD17.2.5
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW001131Offset in the file: 0x18001A
Software / calibration9ZX99T0B / 0000191E_059_010_003Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-U0-F020-EU5-HGAG_-LL-RL-PKR
Internal build stringMEVD17.2.5-CB_L6C-D6.2.0_G.5.12.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99T0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030108235 and software number 1037523874. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

HardwareSoftwareVehicles
00300848501037523874BMW 1 Serie - 5drs
00300853791037523874BMW F20
00300929811037523874BMW 1 Serie - 5drs
00301027111037523874BMW 1 Serie - 5drs
00301212101037527856BMW 1 Serie - 5drs
00301261321037527856BMW 1 Serie - 5drs
00301342661037527856BMW 1er
00301389011037527856BMW F30

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page