Original file

BMW 3er Bosch MEVD17.2.5 0030171891 / 1037532302

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 3er, hardware number 0030171891 and software number 1037532302, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3erN13B16
Control unit
Bosch MEVD17.2.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030171891
Software number
1037532302
Software / calibration
9ZX99L0B / 00001C8C_049_210_005

Technical data

Vehicle
BrandBMW
Car model3er
EngineN13B16
FuelPetrol
Displacement1.6
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number0030171891
Software number1037532302
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3a78458aa27838e5
Identification read from the file
ECU nameMEVD17.2.5
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037532302Offset in the file: 0x18001A
Software / calibration9ZX99L0B / 00001C8C_049_210_005Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-U0-F030-EU6-HGAG_-LL-RL-ROZ87-PKR-PULS
Internal build stringMEVD17.2.5-CB_L6C-D6.2.0_G.5.12.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99L0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030171891 and software number 1037532302. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

HardwareSoftwareVehicles
00301420911037527856BMW 1 Serie - 5drs
00301436041037527856BMW 1er
00301515671037527856BMW 1 Serie - 5drs
00301544171037531049BMW F20
00301749101037531049BMW 3 Serie - Sedan
00301826701037531049BMW 1 Serie - 5drs
00301850351037531049BMW 1er
00301906271037532302BMW 1er

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page