Original file

BMW 1er Bosch MEVD17.2.5 0030190627 / 1037532302

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 1er, hardware number 0030190627 and software number 1037532302, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1er1.6 petrol 170PS
Control unit
Bosch MEVD17.2.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030190627
Software number
1037532302
Software / calibration
9ZX99L0B / 00001C80_049_210_005

Technical data

Vehicle
BrandBMW
Car model1er
Engine1.6 petrol 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number0030190627
Software number1037532302
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfdc9971799260b05
Identification read from the file
ECU nameMEVD17.2.5
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037532302Offset in the file: 0x18001A
Software / calibration9ZX99L0B / 00001C80_049_210_005Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-M0-F020-EU6-HGAG_-LL-RL-PKR-PULS
Internal build stringMEVD17.2.5-CB_L6C-D6.2.0_G.5.12.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99L0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030190627 and software number 1037532302. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

HardwareSoftwareVehicles
00301718911037532302BMW 3er
00301749101037531049BMW 3 Serie - Sedan
00301826701037531049BMW 1 Serie - 5drs
00301850351037531049BMW 1er
00302204451037532302BMW 1 Serie - 5drs
00302210911037532302BMW 1 Serie
00302228531037532302BMW 1 Serie - 5drs
00302369701037532302BMW 1 Serie

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page