Original file

BMW 1 Serie Bosch MEVD17.2.5 0030438367 / 1037542954

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 1 Serie, hardware number 0030438367 and software number 1037542954, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie1.6 130KW
Control unit
Bosch MEVD17.2.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030438367
Software number
1037542954
Software / calibration
9ZX99R0B / 000038A3_049_240_010

Technical data

Vehicle
BrandBMW
Car model1 Serie
Engine1.6 130KW
FuelPetrol
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number0030438367
Software number1037542954
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb511369acf8a1216
Identification read from the file
ECU nameMEVD17.2.5
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037542954Offset in the file: 0x18001A
Software / calibration9ZX99R0B / 000038A3_049_240_010Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-M0-F020-EU6-HGAG_-LL-RL-PKR-PULS-130kW
Internal build stringMEVD17.2.5-CB_L6C-D6.2.0_G.5.12.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99R0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030438367 and software number 1037542954. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

HardwareSoftwareVehicles
00304186061037542954BMW 3 Serie - Sedan
00304199721037542954BMW 1 Serie
00304213751037542954BMW 1 Serie - 5drs
00304275821037542954BMW 1 Serie
003046060210SW001131BMW 3 Serie - Sedan
00304695651037542954BMW 1 Serie - 5drs
00700113139ZX99T0B#00001924_059_010_007BMW 1er
0261S047721037542954BMW 1 Serie - 5drs

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page