Original file

BMW 3 Serie - Sedan 1.6T Bosch MEVD17.2.5 0261S11037 / 9ZX99T0B

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 3 Serie - Sedan 1.6T, hardware number 0261S11037 and software number 9ZX99T0B, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 1.6T1.6 petrol 163.0PS / 119.9kW
Control unit
Bosch MEVD17.2.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S11037
Software number
9ZX99T0B
Bosch part / software
10SW001131
Software / calibration
9ZX99T0B / 00001C94_059_010_003

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 1.6T
Engine1.6 petrol 163.0PS / 119.9kW
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number0261S11037
Software number9ZX99T0B
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key559cb5e6d7db433f
Identification read from the file
ECU nameMEVD17.2.5
Read typeCalibration only (data set)
Bosch part / software10SW001131Offset in the file: 0x18001A
Software / calibration9ZX99T0B / 00001C94_059_010_003Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-M0-F030-EU6-HGAG_-LL-RL-3XXI-ed-PKR-PULS
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99T0B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S11037 and software number 9ZX99T0B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

HardwareSoftwareVehicles
0261S094721037532302BMW 1 Serie - 5drs 1.6i, BMW 1 Serie - 5drs, BMW F30
0261S101361037537439BMW 1 Serie - 5drs 1.6i, BMW F20, BMW 1 Serie - 5drs
0261S103971037538987BMW F20, BMW F20 ERIC CHAN !
0261S110371037542954BMW 3 Serie - Sedan 316i, BMW 3 Serie - Sedan, BMW 1 Serie
0281S083331037523874BMW 1 Serie - 5drs
75B98F0B#98FQJAX11037524498BMW F07
75B98F0B#98FQJHX21037524498BMW F07
75B98F0B#98FQJUX21037524498BMW F07

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page