Original file

BMW 1 Serie - 5drs 1.6i Bosch MEVD17.2.5 9ZX99G0B#00001C82_049_180_002 / 1037527856

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 1 Serie - 5drs 1.6i, hardware number 9ZX99G0B#00001C82_049_180_002 and software number 1037527856, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie - 5drs 1.6i1.6 petrol 136.0PS / 100.0kW
Control unit
Bosch MEVD17.2.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
9ZX99G0B#00001C82_049_180_002
Software number
1037527856
Software / calibration
9ZX99G0B / 00001C82_049_180_002

Technical data

Vehicle
BrandBMW
Car model1 Serie - 5drs 1.6i
Engine1.6 petrol 136.0PS / 100.0kW
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number9ZX99G0B#00001C82_049_180_002
Software number1037527856
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key24256130f5c02bfd
Identification read from the file
ECU nameMEVD17.2.5
Read typeCalibration only (data set)
Bosch part / software1037527856Offset in the file: 0x18001A
Software / calibration9ZX99G0B / 00001C82_049_180_002Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-U0-F020-EU6-HGAG_-LL-RL-PKR-PULS
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99G0B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9ZX99G0B#00001C82_049_180_002 and software number 1037527856. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page