Original file

BMW 1er 118i Bosch MEVD17.2.5 9ZX99T0B#00000FE2_059_010_007 / 1037520745

An original (stock) flash read of the Bosch MEVD17.2.5 control unit, fitted in BMW 1er 118i, hardware number 9ZX99T0B#00000FE2_059_010_007 and software number 1037520745, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1er 118ipetrol 170.0PS / 125.0kW
Control unit
Bosch MEVD17.2.5
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9ZX99T0B#00000FE2_059_010_007
Software number
1037520745
Bosch part / software
10SW001131
Software / calibration
9ZX99T0B / 00000FE2_059_010_007

Technical data

Vehicle
BrandBMW
Car model1er 118i
Enginepetrol 170.0PS / 125.0kW
Displacement1.6
Control unit
Control unitBosch MEVD17.2.5
ECU makerBosch
Hardware number9ZX99T0B#00000FE2_059_010_007
Software number1037520745
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybf5917948a8fa7f8
Identification read from the file
ECU nameMEVD17.2.5
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW001131Offset in the file: 0x18001A
Software / calibration9ZX99T0B / 00000FE2_059_010_007Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.5-N13-Mo-B16-M0-F020-EU5-HGAG_-LL-RL-ROZ87-BBG2_1
Internal build stringMEVD17.2.5-CB_L6C-D6.2.0_G.5.12.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//9ZX99T0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9ZX99T0B#00000FE2_059_010_007 and software number 1037520745. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.5

Bosch MEVD17.2.5 original files

The Bosch MEVD17.2.5 unit page