Original file

BMW 5 Serie - Touring 535i Bosch MEVD17.2.6 00000FEE035901 / 1037525109

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 5 Serie - Touring 535i, hardware number 00000FEE035901 and software number 1037525109, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Touring 535ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
00000FEE035901
Software number
1037525109
Bosch part / software
1037544911
Software / calibration
75P9EH0B / 9EHHDAX7

Technical data

Vehicle
BrandBMW
Car model5 Serie - Touring 535i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number00000FEE035901
Software number1037525109
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key5a24d68edd3aa667
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037544911Offset in the file: 0x18001A
Software / calibration75P9EH0B / 9EHHDAX7Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F011-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9EH0B//75P9EH0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00000FEE035901 and software number 1037525109. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page