Original file

BMW 6 Serie - Cabrio Bosch MEVD17.2.6 0049157762 / 10SW003035

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 6 Serie - Cabrio, hardware number 0049157762 and software number 10SW003035, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6 Serie - Cabriopetrol
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0049157762
Software number
10SW003035
Software / calibration
75P9EJ0B / 9EJHSEX6

Technical data

Vehicle
BrandBMW
Car model6 Serie - Cabrio
Enginepetrol
Displacement3.0
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0049157762
Software number10SW003035
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya54ac7dd9b5615ec
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
Bosch part / software10SW003035Offset in the file: 0x18001A
Software / calibration75P9EJ0B / 9EJHSEX6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-O0-B30-F012-ULEV2-MSA2-_AG-LL-RL-PVL-BHDP
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9EJ0B//75P9EJ0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0049157762 and software number 10SW003035. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
00000FEF7764011037533123BMW 1 Serie - 5drs 135i
00000FEF8182021037540108BMW 3er
000012C87764031037533123BMW 1er M135i
00002761811037521903BMW 5er GT
008798098D0BQFC2SBMW E90/E91/E92/E93
008798098D0BQFC5S1037518222BMW E90/E91/ E92/E93
008798098D0BQFM2SBMW 3er
00879S09E60BHEE4S1037533726BMW E92/E93

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page