Original file

BMW 5er Bosch MEVD17.2.6 0170197031 / 1037528738

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 5er, hardware number 0170197031 and software number 1037528738, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er3.0 306PS
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170197031
Software number
1037528738
Bosch part / software
10SW016887
Software / calibration
75P9EL0B / 9ELHDAX1

Technical data

Vehicle
BrandBMW
Car model5er
Engine3.0 306PS
FuelPetrol
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0170197031
Software number1037528738
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key799d7696060c69b5
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW016887Offset in the file: 0x18001A
Software / calibration75P9EL0B / 9ELHDAX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F011-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9EL0B//75P9EL0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170197031 and software number 1037528738. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
01701089281037528738BMW 7 Serie - Sedan
01701100271037528738BMW 1er
01701464721037528872BMW 1er
01701897181037528738BMW 5 Serie - Sedan
01702002851037528634BMW F01 BR PERFORMANCE
01702444251037533123BMW 5 Serie - Sedan
01702733161037533123BMW 5er
017040942675P9EJ0B#9EJHVMX2BMW 3er

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page