Original file

BMW F30 Bosch MEVD17.2.6 0261S07895 / 1037533123

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW F30, hardware number 0261S07895 and software number 1037533123, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F303.0 petrol 306PS
Control unit
Bosch MEVD17.2.6
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S07895
Software number
1037533123
Software / calibration
75P9D65B / 9D6HMAX2

Technical data

Vehicle
BrandBMW
Car modelF30
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0261S07895
Software number1037533123
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6745bf1408a02fda
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software1037533123Offset in the file: 0x18001A
Software / calibration75P9D65B / 9D6HMAX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F030-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9D65B//75P9D65B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07895 and software number 1037533123. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
01702002851037528634BMW F01 BR PERFORMANCE
01702444251037533123BMW 5 Serie - Sedan
01702733161037533123BMW 5er
017040942675P9EJ0B#9EJHVMX2BMW 3er
0261S080821037533131BMW X5
0261S080821037533726BMW X6
0261S080821037545578BMW 3er
0261S080821037556743BMW 1er, BMW 3er, BMW 1er 118i

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page