Original file

BMW 3er Bosch MEVD17.2.6 0261S08082 / 1037545578

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3er, hardware number 0261S08082 and software number 1037545578, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er3.0 petrol 306PS
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S08082
Software number
1037545578
DME hardware number
8643744
Software / calibration
00879S09EH0BHFM2S

Technical data

Vehicle
BrandBMW
Car model3er
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0261S08082
Software number1037545578
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye1ba2b5ca071fc51
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037545578Offset in the file: 0x02001A
DME hardware number8643744Offset in the file: 0x00D8AA
Software / calibration00879S09EH0BHFM2SOffset in the file: 0x180079
Internal build string011_G.8.8.0_MEVD1726P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_79S9EH0B//79S9EH0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08082 and software number 1037545578. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
017040942675P9EJ0B#9EJHVMX2BMW 3er
0261S078951037533123BMW F30
0261S080821037533131BMW X5
0261S080821037533726BMW X6
0261S080821037556743BMW 1er, BMW 3er, BMW 1er 118i
0261S081481037533981BMW 3er
0261S0814810SW003035BMW 6 Serie - Cabrio
0261S084391037524840BMW 1er

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page