Original file

BMW 6 Serie - Cabrio Bosch MEVD17.2.6 0261S08148 / 10SW003035

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 6 Serie - Cabrio, hardware number 0261S08148 and software number 10SW003035, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6 Serie - CabrioN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S08148
Software number
10SW003035
Software / calibration
75P9EJ0B / 9EJHSAX6

Technical data

Vehicle
BrandBMW
Car model6 Serie - Cabrio
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0261S08148
Software number10SW003035
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf5b545fb8bb80f1f
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software10SW003035Offset in the file: 0x18001A
Software / calibration75P9EJ0B / 9EJHSAX6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-O0-B30-F012-EU5-MSA2-AG_LL-RL-PVL-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9EJ0B//75P9EJ0B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08148 and software number 10SW003035. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
0261S080821037533726BMW X6
0261S080821037545578BMW 3er
0261S080821037556743BMW 1er, BMW 3er, BMW 1er 118i
0261S081481037533981BMW 3er
0261S084391037524840BMW 1er
0261S086821037533978BMW F30
0261S089851037528634BMW F30
0261S089961037540108BMW 1 Serie - 5drs

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page