Original file

BMW 1er Bosch MEVD17.2.6 0261S08439 / 1037524840

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 1er, hardware number 0261S08439 and software number 1037524840, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1er3.0 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S08439
Software number
1037524840
DME hardware number
7645694
Software / calibration
00879S09BA0BHFP2S

Technical data

Vehicle
BrandBMW
Car model1er
Engine3.0
FuelPetrol
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0261S08439
Software number1037524840
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye8b0c9d4f159fee6
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037524840Offset in the file: 0x02001A
DME hardware number7645694Offset in the file: 0x00D8AA
Software / calibration00879S09BA0BHFP2SOffset in the file: 0x180079
Internal build string011_G.8.7.0_MEVD1726P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79S9BA0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08439 and software number 1037524840. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
0261S080821037545578BMW 3er
0261S080821037556743BMW 1er, BMW 3er, BMW 1er 118i
0261S081481037533981BMW 3er
0261S0814810SW003035BMW 6 Serie - Cabrio
0261S086821037533978BMW F30
0261S089851037528634BMW F30
0261S089961037540108BMW 1 Serie - 5drs
0261S089971037528776BMW X5, BMW 3er, BMW 135

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page