Original file

BMW F30 Bosch MEVD17.2.6 0261S08985 / 1037528634

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW F30, hardware number 0261S08985 and software number 1037528634, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F303.0 petrol 306PS
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S08985
Software number
1037528634
Software / calibration
75H9BY0B / 9BYXYIX1

Technical data

Vehicle
BrandBMW
Car modelF30
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number0261S08985
Software number1037528634
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5d8a9d700f1bf661
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037528634Offset in the file: 0x18001A
Software / calibration75H9BY0B / 9BYXYIX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-Gen2_0-M0-B30-F030-EU5-HG_-AG-LL-RL-BHDP-OENS-NEU
Internal build stringMEVD17.2.H-CB_L6C-D6.2.0_G.5.10.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75H9BY0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S08985 and software number 1037528634. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
0261S081481037533981BMW 3er
0261S0814810SW003035BMW 6 Serie - Cabrio
0261S084391037524840BMW 1er
0261S086821037533978BMW F30
0261S089961037540108BMW 1 Serie - 5drs
0261S089971037528776BMW X5, BMW 3er, BMW 135
0261S089971037533726BMW E70, BMW X5, BMW E71
0261S089971037540002BMW 3er

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page