Original file
BMW 3 Serie - Sedan 335i Bosch MEVD17.2.6 75H9BV0B#9BVXYIX2 / 1037525639
An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3 Serie - Sedan 335i, hardware number 75H9BV0B#9BVXYIX2 and software number 1037525639, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3 Serie - Sedan 335ipetrol 306.0PS / 225.1kW
- Control unit
- Bosch MEVD17.2.6
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 75H9BV0B#9BVXYIX2
- Software number
- 1037525639
- Software / calibration
- 75H9BV0B / 9BVXYIX2
Technical data
| Brand | BMW |
|---|---|
| Car model | 3 Serie - Sedan 335i |
| Engine | petrol 306.0PS / 225.1kW |
| Displacement | 3.0 |
| Control unit | Bosch MEVD17.2.6 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 75H9BV0B#9BVXYIX2 |
| Software number | 1037525639 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 9f6eede7289c17a0 |
| ECU name | MEVD17.2.6 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 1037525639 | Offset in the file: 0x18001A |
| Software / calibration | 75H9BV0B / 9BVXYIX2 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2-N55-Gen2_0-M0-B30-F030-EU5-HG_-AG-LL-RL-BHDP-OENS-NEU | |
| Internal build string | MEVD17.2.H-CB_L6C-D6.2.0_G.5.10.0 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//75H9BV0B/Dst00// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 75H9BV0B#9BVXYIX2 and software number 1037525639. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.6
| Hardware | Software | Vehicles |
|---|---|---|
| 0261S09721 | 1037533726 | BMW X6 |
| 0261S09721 | 1037545578 | BMW E90 ANDERE TUNER !!, BMW 3 |
| 0261S09721 | 1037556743 | BMW 3er |
| 0789576374 | 1037533123 | BMW 3 Serie - Sedan |
| 75H9EH0B#9EHXYJX7 | 1037545066 | BMW 3 Serie - Sedan 335i |
| 75H9EI2B#9EIXYGX6 | 10SW004108 | BMW 5 Serie - Sedan |
| 75P9BA1B#9BAHBAX7 | 1037525109 | BMW F10/F11/F18 |
| 75P9BA1B#9BAHBMX7 | 1037525109 | BMW 5 Serie - Sedan |