Original file

BMW 3 Serie - Sedan iL Bosch MEVD17.2.6 75P9BC5B#9BCHMOY0 / 1037528872

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3 Serie - Sedan iL, hardware number 75P9BC5B#9BCHMOY0 and software number 1037528872, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan iL3.0 365HP
Control unit
Bosch MEVD17.2.6
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
75P9BC5B#9BCHMOY0
Software number
1037528872
Software / calibration
75P9BC5B / 9BCHMOY0

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan iL
Engine3.0 365HP
FuelPetrol
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number75P9BC5B#9BCHMOY0
Software number1037528872
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycf8289c9af68ec10
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software1037528872Offset in the file: 0x18001A
Software / calibration75P9BC5B / 9BCHMOY0Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F035-EU5-MSA2-HG_AG-LL-RL-CHINA-PVL-BHDP
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75P9BC5B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75P9BC5B#9BCHMOY0 and software number 1037528872. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page