Original file

BMW 3 Serie - Sedan 335i Bosch MEVD17.2.6 75P9D60B#9D6HMDX1 / 1037531116

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3 Serie - Sedan 335i, hardware number 75P9D60B#9D6HMDX1 and software number 1037531116, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 335ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
75P9D60B#9D6HMDX1
Software number
1037531116
Software / calibration
75P9D60B / 9D6HMDX1

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 335i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number75P9D60B#9D6HMDX1
Software number1037531116
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyce7a71d763e0c36b
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software1037531116Offset in the file: 0x18001A
Software / calibration75P9D60B / 9D6HMDX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F030-EU5-MSA2-HG_AG-LL-RL-Allrad-PVL-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9D60B//75P9D60B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75P9D60B#9D6HMDX1 and software number 1037531116. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
75P9BC5B#9BCHMAY01037528872BMW F30
75P9BC5B#9BCHMOY01037528872BMW 3 Serie - Sedan iL
75P9BC5B#9BCHMSY01037528872BMW F20
75P9D60B#9D6HCAX11037531116BMW F20
75P9D60B#9D6HOHX11037531116BMW 6 Serie - Gran Coupe
75P9D60B#9D6HPGX01037531116BMW F32
75P9D65B#9D6HBHX31037533123BMW 5 Serie - Sedan 535i
75P9D65B#9D6HCHX21037533123BMW 2er PHIL COOOPER M235i

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page