Original file

BMW 1 Serie - 5drs 3.0i Bosch MEVD17.2.6 75P9E60B#9E6HCDX5 / 1037528872

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 1 Serie - 5drs 3.0i, hardware number 75P9E60B#9E6HCDX5 and software number 1037528872, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie - 5drs 3.0i3.0 petrol 320.0PS / 235.4kW
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
75P9E60B#9E6HCDX5
Software number
1037528872
Bosch part / software
1037533981
Software / calibration
75P9E60B / 9E6HCDX5

Technical data

Vehicle
BrandBMW
Car model1 Serie - 5drs 3.0i
Engine3.0 petrol 320.0PS / 235.4kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number75P9E60B#9E6HCDX5
Software number1037528872
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9d9792f8e81f2086
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037533981Offset in the file: 0x18001A
Software / calibration75P9E60B / 9E6HCDX5Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-O0-B30-F020-EU5-MSA2-HG_AG-LL-RL-Allrad-PVL-BHDP-M
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.15.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9E60B//75P9E60B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75P9E60B#9E6HCDX5 and software number 1037528872. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

HardwareSoftwareVehicles
75P9D60B#9D6HOHX11037531116BMW 6 Serie - Gran Coupe
75P9D60B#9D6HPGX01037531116BMW F32
75P9D65B#9D6HBHX31037533123BMW 5 Serie - Sedan 535i
75P9D65B#9D6HCHX21037533123BMW 2er PHIL COOOPER M235i
75P9E60B#9E6HMHX51037533981BMW F30
75P9E75B#9E7HREY11037537567BMW F01/F02/F03
75P9EF0B#9EFHBAX61037540108BMW 5 Serie - Sedan 535i
75P9EF0B#9EFHCJX81037540108BMW F20

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page