Original file

BMW 3 Serie - Sedan Bosch MEVD17.2.6 75P9EJ0B#9EJHMDX6 / 10SW003035

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3 Serie - Sedan, hardware number 75P9EJ0B#9EJHMDX6 and software number 10SW003035, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - SedanN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
75P9EJ0B#9EJHMDX6
Software number
10SW003035
Software / calibration
75P9EJ0B / 9EJHMDX6

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware number75P9EJ0B#9EJHMDX6
Software number10SW003035
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3cf102cf208217b0
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software10SW003035Offset in the file: 0x18001A
Software / calibration75P9EJ0B / 9EJHMDX6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-M0-B30-F030-EU5-MSA2-HG_AG-LL-RL-Allrad-PVL-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75P9EJ0B//75P9EJ0B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75P9EJ0B#9EJHMDX6 and software number 10SW003035. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page