Original file
BMW 5 Serie - Sedan 535i Bosch MEVD17.2.6 75P9EL0B#9ELHBEX1 / 75P9EL0B
An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 5 Serie - Sedan 535i, hardware number 75P9EL0B#9ELHBEX1 and software number 75P9EL0B, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5 Serie - Sedan 535ipetrol 306.0PS / 225.1kW
- Control unit
- Bosch MEVD17.2.6
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 75P9EL0B#9ELHBEX1
- Software number
- 75P9EL0B
- Bosch part / software
- 10SW016887
- Software / calibration
- 75P9EL0B / 9ELHBEX1
Technical data
| Brand | BMW |
|---|---|
| Car model | 5 Serie - Sedan 535i |
| Engine | petrol 306.0PS / 225.1kW |
| Displacement | 3.0 |
| Control unit | Bosch MEVD17.2.6 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 75P9EL0B#9ELHBEX1 |
| Software number | 75P9EL0B |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 61a3d99eae729338 |
| ECU name | MEVD17.2.6 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW016887 | Offset in the file: 0x18001A |
| Software / calibration | 75P9EL0B / 9ELHBEX1 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.6-N55-M0-B30-F010-ULEV2-MSA2-_HG-AG-LL-RL-PVL-BHDP | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD1726_75P9EL0B//75P9EL0B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 75P9EL0B#9ELHBEX1 and software number 75P9EL0B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.6
| Hardware | Software | Vehicles |
|---|---|---|
| 75P9EJ0B#9EJHCDX6 | 1037533123 | BMW F20 |
| 75P9EJ0B#9EJHCHX5 | 10SW003035 | BMW F20 NOEL |
| 75P9EJ0B#9EJHMDX6 | 10SW003035 | BMW 3 Serie - Sedan |
| 75P9EJ0B#9EJHMQX6 | 10SW003035 | BMW 3 Serie - Sedan |
| 75P9EL0B#9ELHCAX1 | 10SW016887 | BMW 1 Serie - 5drs |
| 75P9EL0B#9ELHCDX1 | 75P9EL0B#9ELHCDX1 | BMW 1er |
| 75P9EL0B#9ELHMLX1 | 75P9EL0B | BMW 6 Serie - Gran Coupe 640i |
| 75P9EL0B#9ELHOEX1 | 10SW016887 | BMW 6 Serie - Gran Coupe |