Original file
Alpina F30 3.0 Bi-T Bosch MEVD17.2.6 75X9BL5B#00001F4C / 1037545022
An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in Alpina F30 3.0 Bi-T, hardware number 75X9BL5B#00001F4C and software number 1037545022, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Alpina F30 3.0 Bi-T3.0 petrol 410.0PS / 301.6kW
- Control unit
- Bosch MEVD17.2.6
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 75X9BL5B#00001F4C
- Software number
- 1037545022
- Software / calibration
- 75X9BL5B / 00001F4C
Technical data
| Brand | Alpina |
|---|---|
| Car model | F30 3.0 Bi-T |
| Engine | 3.0 petrol 410.0PS / 301.6kW |
| Control unit | Bosch MEVD17.2.6 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 75X9BL5B#00001F4C |
| Software number | 1037545022 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 07df2cc57ca3063f |
| ECU name | MEVD17.2.6 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 1037545022 | Offset in the file: 0x18001A |
| Software / calibration | 75X9BL5B / 00001F4C | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.6-N55-ML-R20-F030-EU6-MSA2-AG_AG-LL-2WD-CHDP-ALP-MRZ16-8683499 | |
| Internal build string | N55-Alpina-CB_L6C-D6.2.0_G.5.14.0 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//75X9BL5B/Dst00// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 75X9BL5B#00001F4C and software number 1037545022. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.6
| Hardware | Software | Vehicles |
|---|---|---|
| 75S9BG0B#9BGTAFX2 | 1037525811 | BMW F30 |
| 75S9BG0B#9BGTAHX2 | 1037525811 | BMW F30/F31 |
| 75S9BG0B#9BGTAMX2 | 1037525811 | BMW 3 Serie - Sedan |
| 75S9BG0B#9BGTARX2 | 1037525811 | BMW F30/F31 |
| 97653210 | 1037528872 | BMW 1er |
| DST#MEVD17.2.6-N55-M0-B30-F007-EU5-MSA2-AG_LL-RL-MKS-BHDP | 1037533123 | BMW 5er |
| DST#MEVD17.2.6-N55-M0-B30-F010-EU5-MSA2-HG_AG-LL-RL-MKS-BHDP | 75P9EL0B#9ELHBHX1 | BMW 5er |
| DST#MEVD17.2.6-N55-M0-B30-F010-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP | 1037533123 | BMW 5er |