Original file

BMW 3er Bosch MEVD17.2.6 DST#MEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP / 1037533222

An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3er, hardware number DST#MEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP and software number 1037533222, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3erN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
DST#MEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Software number
1037533222
Software / calibration
75S9D65B / 9D6TACX2

Technical data

Vehicle
BrandBMW
Car model3er
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.6
ECU makerBosch
Hardware numberDST#MEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Software number1037533222
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key988adfc1c4811635
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
Bosch part / software1037533222Offset in the file: 0x18001A
Software / calibration75S9D65B / 9D6TACX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75S9D65B//75S9D65B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.S-N55-M0-B30-F031-EU5-MSA2-HG_AG-LL-RL-PVL-BHDP and software number 1037533222. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.6

Bosch MEVD17.2.6 original files

The Bosch MEVD17.2.6 unit page