Original file
BMW 3er 3.0 Bosch MEVD17.2.6 SW atual.: 00000FFE81A007 / 9EJHMHX6
An original (stock) flash read of the Bosch MEVD17.2.6 control unit, fitted in BMW 3er 3.0, hardware number SW atual.: 00000FFE81A007 and software number 9EJHMHX6, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3er 3.03.0 petrol 303.0PS / 222.9kW
- Control unit
- Bosch MEVD17.2.6
- Read type
- Full read (boot area included)
- File
- 8,192.00 KB · Flash
- Hardware number
- SW atual.: 00000FFE81A007
- Software number
- 9EJHMHX6
- Bosch part / software
- 10SW003035
- Software / calibration
- 75P9EJ0B / 9EJHMHX6
Technical data
| Brand | BMW |
|---|---|
| Car model | 3er 3.0 |
| Engine | 3.0 petrol 303.0PS / 222.9kW |
| Control unit | Bosch MEVD17.2.6 |
|---|---|
| ECU maker | Bosch |
| Hardware number | SW atual.: 00000FFE81A007 |
| Software number | 9EJHMHX6 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | 8f770c47b685c954 |
| ECU name | MEVD17.2.6 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW003035 | Offset in the file: 0x18001A |
| Software / calibration | 75P9EJ0B / 9EJHMHX6 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.6-N55-M0-B30-F030-EU5-MSA2-HG_AG-LL-RL-MKS-PVL-BHDP | |
| Internal build string | MEVD17.2.6-CB_L6C-D6.2.0_G.5.15.1 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD1726_75P9EJ0B//75P9EJ0B/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.6 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number SW atual.: 00000FFE81A007 and software number 9EJHMHX6. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.