Original file

BMW 6 Serie - Gran Coupe 640i Bosch MEVD17.2.8 000010C8636402 / 8AC9795B

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW 6 Serie - Gran Coupe 640i, hardware number 000010C8636402 and software number 8AC9795B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6 Serie - Gran Coupe 640ipetrol 450.0PS / 331.0kW
Control unit
Bosch MEVD17.2.8
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
000010C8636402
Software number
8AC9795B
Bosch part / software
10SW003484
Software / calibration
8AC9795B / 979NA8X6

Technical data

Vehicle
BrandBMW
Car model6 Serie - Gran Coupe 640i
Enginepetrol 450.0PS / 331.0kW
Displacement4.4
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number000010C8636402
Software number8AC9795B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd45e84982d2808a1
Identification read from the file
ECU nameMEVD17.2.8
Read typeCalibration only (data set)
Bosch part / software10SW003484Offset in the file: 0x18001A
Software / calibration8AC9795B / 979NA8X6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-N63TUE-B44-O1-F06-F12-F13--_EU5-AG-LL-RL-AWD
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8AC9795B//8AC9795B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 000010C8636402 and software number 8AC9795B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page