Original file

BMW 6er M6 4.4 BiTurbo Bosch MEVD17.2.8 00001242033101 / 1037524472

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW 6er M6 4.4 BiTurbo, hardware number 00001242033101 and software number 1037524472, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6er M6 4.4 BiTurbo4.4 petrol 560.0PS / 411.9kW
Control unit
Bosch MEVD17.2.8
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00001242033101
Software number
1037524472
Bosch part / software
1037539969
Software / calibration
8BC959CB / 500_S63_BG2_US_DKG027

Technical data

Vehicle
BrandBMW
Car model6er M6 4.4 BiTurbo
Engine4.4 petrol 560.0PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number00001242033101
Software number1037524472
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key64341f4a36a7bbef
Identification read from the file
ECU nameMEVD17.2.8
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037539969Offset in the file: 0x18001A
Software / calibration8BC959CB / 500_S63_BG2_US_DKG027Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG
Internal build stringMEVD17.2.8-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//8BC959CB/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00001242033101 and software number 1037524472. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

HardwareSoftwareVehicles
000010C86364028AC9795BBMW 6 Serie - Gran Coupe 640i
00001242031037515403BMW F01/F02/F03
00001242031037525741BMW 6 Serie - Gran Coupe
00001242033101000010CA3B8C01 - 000010CC3B8C1BBMW 6er 650i
000501704510SW003484BMW 6 Serie - Gran Coupe
00300175281037525741BMW F12/F13/F06
00300259041037524472BMW 5er
00300270121037524472BMW F10

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page