Original file

BMW 6 Serie - Gran Coupe Bosch MEVD17.2.8 0005017045 / 10SW003484

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW 6 Serie - Gran Coupe, hardware number 0005017045 and software number 10SW003484, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6 Serie - Gran Coupe4.4 petrol 450PS
Control unit
Bosch MEVD17.2.8
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0005017045
Software number
10SW003484
Software / calibration
8AC9795B / 979NB8X6

Technical data

Vehicle
BrandBMW
Car model6 Serie - Gran Coupe
Engine4.4 petrol 450PS
Power450.0PS / 331.0kW
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number0005017045
Software number10SW003484
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key19b4b8657d283263
Identification read from the file
ECU nameMEVD17.2.8
Read typeCalibration only (data set)
Bosch part / software10SW003484Offset in the file: 0x18001A
Software / calibration8AC9795B / 979NB8X6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-N63TUE-B44-O1-F06-F12-F13--_ULEV2-AG-LL-RL-AWD
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8AC9795B//8AC9795B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0005017045 and software number 10SW003484. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

HardwareSoftwareVehicles
00001242031037515403BMW F01/F02/F03
00001242031037525741BMW 6 Serie - Gran Coupe
00001242033101000010CA3B8C01 - 000010CC3B8C1BBMW 6er 650i
000012420331011037524472BMW 6er M6 4.4 BiTurbo
00300175281037525741BMW F12/F13/F06
00300259041037524472BMW 5er
00300270121037524472BMW F10
00300286041037525741BMW 7 Serie - Sedan

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page